In this review, I will take a look at the Ironman Gravity Inversion Table 4000. I will discuss the features and benefits of this inversion table, and what you can expect if you were to purchase one. If you are in the market for a heavy-duty inversion table, I encourage you to keep reading.
- 1 IRONMAN Gravity inversion table
With so many inversion tables available today it can be hard to find just the right one. I have used different inversion tables over the years, and my goal is to shed some light on this model from Ironman.
Product: IRONMAN Gravity 4000
Rating: 95 out of 100
Dimensions: 26 inches wide x 65 inches high x 49 inches wide
Product weight: About 75 pounds
User height: Up to 6’6”
User weight limit: 350 pounds
How do inversion tables work?
Inversion tables help to elongate the spine and take pressure off of the discs. By inverting, the discs are able to recover and rehydrate.
I use an inversion table as I have chronic sciatica and inverting really helps me out. Some people have tight muscles, or a herniated disc, just a few of the conditions an inversion table can help with.
It’s best to check with your doctor to make sure you are fit to use an inversion table, as people with certain medical conditions should not invert.
You may also want to check out my inversion table guide here.
With that said, let’s get right to it!
IRONMAN Gravity inversion table
The Ironman Gravity 4000 support users up to 350 pounds, which is definitely more than most inversion tables on the market today. People come in all shapes and sizes, so it’s nice to know that this table can be used by a wide variety of body types.
The table is made from tubular steel and is very sturdy. There are protective, rubber non-skid floor stabilizers, on the bottom of the inversion table which will help protect your floors. These non-skid stabilizers will also help to keep the table firmly in place when you are upside down.
Ankle locking system
To me, this is one of the most essential parts of any inversion table. After all, you will literally be hanging upside down by your ankles. You need a comfortable solution that will protect your ankles, feet and distribute your weight evenly.
This unit has ergonomic ankle cushions that cup the front and backside and provide a secure and comfortable fit. Most people have said the padding is adequate. There is no pinch point pressure while you are inverted.
The Palm Activated ratchet locking system
Another super important feature is the extended-release handle. This handle provides an easy way to release (or escape) from the table when you are finished. I wish more inversion tables had a longer handle release.
This extended handle makes it so you don’t have to bend over very far to release yourself. From experience, I can tell you this feature is invaluable. I have been in situations, recovering from an injury, where I literally couldn’t bend over, so the extended handle is a must in my opinion.
Also, the ratchet locking system allows you to get just the right fit for your ankles, not to tight and not too loose. Inverting with the ankle lock too tight is not fun, and if it’s too loose, you feel like you are going to end up on the floor.
User height adjustment
The adjustable user height is pretty easy to set up here as well. You want the table to rotate in and out of inversion easily so getting this right is important. You should be able to return to the upright position, almost effortlessly by moving your arms. You shouldn’t have to strain to return to the upright position.
There are preset height settings on the unit, and all you do is pull the pin and slide the bar to select your height. Sometimes, depending on your center of gravity, or if you are between heights, you may have to adjust the setting slightly.
For instance, if you are 6’0” and the table is difficult to rotate up and down, you may need to try the 6’1” setting. You can play with it and make sure you get it set up correctly.
Most people will just need to set the height accordingly and go with that.
Inversion table angle adjustment
There are two methods that inversion tables are equipped with to set the angle you are going to invert at. One uses a preset push pin mechanism, and the other is a tether strap. I will explain both of these designs and explain which one I think is better.
A table with a push pin mechanism has preset angles, like 15, 30, 45, 60 degrees, etc. These preset options make choosing your inversion angle very easy but do have limitations. You are restricted to these preset angles, and if you need a different angle you are out of luck. For most people this may be fine. I will explain in more detail how the tether strap is superior in my opinion.
This IRONMAN unit employs the tether strap method. I favor the tether strap as you can literally set the angle anywhere you want. You are not limited to the preset angles.
When I was recovering from a back injury in late 2015, early 2016 I had to start at a very shallow angle, like 15 degrees. Due to the nature of my injury, I was only able to make smaller adjustments, like 5-degree adjustments, to my inversion angle. The preset inversion angle design would not have worked for me in my recovery. Given this, a tether strap is a must in my opinion. I prefer the customization of the tether strap style.
The Ironman Gravity 4000 has a thick memory foam pad which is really easy on the back. There is an included lumbar support for your lower back, should you decide to use that as well. The bed is wide and sturdy, and the table can support up to 350 pounds. I have used this particular model and can confirm that it is comfortable to lay on. The backrest is easy to clean also.
Ah, the fun part, you will need to assemble the inversion table. You can follow my pointers for assembly here. I highly recommend you have someone available to help you.
Sure, you can build it all by yourself, but it will take longer and probably be more frustrating. Inversion tables are awkwardly shaped and can be heavy, making them difficult to assemble and move.
If you are nursing a back injury, the last thing you need to be doing is trying to maneuver a heavy piece of equipment (been there, done that), that is why I recommend that some help you.
If you really don’t want to put it together yourself, assembly is available for an extra charge :).
- Sturdy inversion table that may help reducing back stress and stimulating circulation
- Removable lumbar pillow provides extra comfort for lower back support while inverting
- Tough rubber non-skid floor stabilizers. Inverts up to 90 degrees; It has a 2.5 inch thick Memory-Foam vinyl covered backrest to provide superior comfort.
- Ergonomically molded ankle cushions; Folds for storage; Assembled measures 26 x 65 x 49 inches (W x H x D)
- Weight Capacity - Supports up to 350 pounds
Okay, so they always promote how these inversion tables fold up, and you can store them away. Well based on my experience, it’s not that easy. If you are using an inversion table to recover from a back injury, or you are in pain, the last thing you really want to do is haul a 75 pound, awkwardly shaped inversion table very far.
I find it is easier to keep it in the room I am using it, like an office, spare room, or basement and then yes, you can fold it up, but just lean it against the wall. These tables are difficult to store underneath a bed, or in a closet. Sure, it’s not the prettiest thing to have in the corner, but it also serves as a great place to hang clothes LOL.
This is just some friendly advice from a guy who uses an inversion table on a regular basis.
The table comes with extended handlebars, which are helpful for returning upright. Although if you have the table set up correctly for your height, you really shouldn’t need to use the handles.
You can fully invert with this table. Whether that is 90 degrees or 180 degrees, I am still not sure what to call it, but either way, you can be completely 100% upside down.
I will tell you from experience that inverting can take some getting used to. I recommend that you start off with a shallow angle and work your way up (or down depending on your perspective) from there. As you get more comfortable and confident, inverting is easy. I currently use a 60-degree angle and find that is a great angle for me.
I definitely recommend wearing shoes (athletic) and socks, as this is really big help. I have tried to skip this step, and I always regret it. The padding is only so good, and when your body weight is pulling against your feet and ankles, it’s really nice to have shoes on. I promise you won’t regret wearing shoes
- Budget-friendly inversion table
- Supports up to 350 pounds
- Extended handle ankle lock system means less bending over
- Tons of positive customer reviews
- The memory foam back may cause some people to get a sweaty back
- It’s really heavy to try to move around
Wrapping up: Ironman Gravity Inversion Table 4000
I hope you have enjoyed this inversion table review. You didn’t know there was so much to consider with an inversion table right?
This inversion table is well built and offers a lot of functionality. I really think this table is a good value, for the price. You can find similar units that are priced higher than this and will provide the same functionality.
I definitely recommend this table if you are in the market. You can click here for more information, or to make a purchase.
Please check out my post for other great inversion table options.
If you have any questions or comments, please leave them below, and I will get back to you as soon as I can.
As always, thank you for taking some time out of your day, I appreciate it.